Chase Construction Products Marine Modules and Tape


	TC® Enviroshield® Series Proven Corrosion Protection for Pilings and Offshore Risers Modular Marine Corrosion Protection System The TC Enviroshield Series R module is designed for the maximum protection of offshore platform risers and lateral beams from the harsh marine environment. This easy field-applied modular system provides abrasion and corrosion pro-tection of existing and new marine structures. A tough outer abrasion-resistant jacket activates an en-capsulating environmentally-safe petrolatum with the tensioning of an easy-installation closure system. The TC Enviroshield allows for quick reinspection and easy accommodation of lateral braces, peripheral beams and weld-attached anodes. This easy field-applied protection can be installed in and out of the water on a wet or dry minimally prepared surface. The TC Enviroshield Series R module is an easy field-applied maximum marine protection system. The Series R module provides proven corrosion protection, re-inspection capability, aesthetic appearance, accommodation for lateral braces and environmental sensitivity
Rapid Closure System with corrosion inhibiting petrolatum.

Piling Encapsulation
	Factory assembled for field installation Install on minimally prepared surface Apply to wet, dry, or underwater surface Inner petrolatum mat encapsulates and seals substrate Tough multi-layer urethane outer jacket Composite tensioning closure system forces petrolatum into pores of surface No metal components No hand tapping or exterior bands RE-INSPECTABLE Available in 5 ft. and 2.5 ft. length with a 3 in. overlap for longer requirements
	TC® Enviroshield® Series Proven Corrosion Protection for Pilings and Offshore Risers
	Modular Marine Corrosion Protection System
	The S Module protects square shaped piles and fluted mono piles. A multi-layer urethane outer jacket compresses a foam layer forcing a petrolatum inner mat into pores of the pile surface. TC Enviroshield Series S Module seals the surface of square concrete piles and provides corrosion protection for fluted mono piles. Utilizes the same inner mat, outer jacket,and closure system as the R module Extra open-cell foam layer assures petrolatum mat continuous contact with flat pile or fluted surface One-piece factory assembled module for easy field installation RE-INSPECTABLE
	TC®Enviroshield® Series Proven Corrosion Protection for Pilings and Offshore Risers Modular Marine Corrosion Protection System
	The TC Marine borers have plagued mariners for centuries. In recent years their infestation has accelerated with the reduction of pollution in our waterways and harbors. The TC Enviroshield T Series module is an easy answer to this costly problem. This modular protection system is a permanent solution that stops borer infestation by restricting the flow of oxygenated water to timber pilings and marine wood. TC Enviroshield Series T modules are designed with an abrasion-resistant outer jacket that incorporates a moldable gasket material. This field-applied marine protection can be installed in and out of the water on a minimally-prepared wet or dry surface. TC Enviroshield Series T modules are designed to protect round, irregular and tapered timber pilings. Eliminates the flow of oxygenated water to pile surface Lowers the dissolved oxygen content of the water inside the pile wrap Tapecoat's unique Moldable Sealant provides vertical,top and bottom seal Flexible EPDM outer jacket is UV resistant, will not harden, become brittle or crack over time
	TC®Enviroshield® Series Proven Corrosion Protection for Pilings and Offshore Risers Modular Marine Corrosion Protection System The TC Enviroshield Series H-Foam modules are designed for the maximum protection of steel H pilings from the harsh marine environment. This easy field-applied modular system provides abrasion and corrosion protection of existing and new marine structures. The H-Foam module utilizes a tough outer abrasion-resistant jacket that activates an encapsulating, environmentally-safe petrolatum with the tensioning of an easy install-ation closure system. TC Enviroshield Series modules allow for quick reinspection of protected steel H pilings. This easy field-applied marine protection system can be installed in and out of the water on a dry or wet minimally prepared steel surface. The TC Enviroshield H-Foam modules are easy field-applied maximum marine protection systems. The TC Envirocoat provides proven corrosion protection, re-inspection capability, aesthetic appearance, accommodation for lateral braces and environmental sensitivity. No exterior banding. No extensive tape wrapping. No awkward irregular transitions.
	FOUR EASY H FOAM INSTALLATION STEPS: STEP 1 Clean the marine growth from the piling. Prep with TC Enviroprime. STEP 2 Form the petrolatum mat lining to the piling.
	STEP 3 Insert the foam into the piling . STEP 4 Wrap the piling with jacket and tighten closure clips with a pneumatic wrench
	TC®Enviroshield® Series Proven Corrosion Protection for Pilings and Offshore Risers Modular Marine Corrosion Protection System Problem: ABRASION of PILE SURFACE Movement of pile rollers wears away steel surface and coating. Problem: SPLASH ZONE CORROSION Traditional coatings do not hold up in the splash zone. Solution: TAPECOAT TC Enviroshield Series M Module A tough outer jacket surrounds and protects the non-toxic inner petrolatum mat.

	OUTER JACKET
	UV Stabilized Impervious to marine borers Low co-efficient of friction in any weather Abrasion resistant - Better than stainless steel Will not rot, absorb water, or leach chemicals Virtually unbreakable, Impact resistant Non-marking
	INNER MAT
	Superior protection against corrosion Non-toxic petrolatum mat Installed on minimally prepared surfaces Protects wet or dry surfaces Splash zone corrosion is compounded by the continual abrasion of the pile's steel surface by tidal movement of the pile guide rollers.
	More Abrasion resistant than steel Maximum Corrosion Protection Easy installation Environment - Safe Available in a wide variety of aesthetic colors.

	H35 ® Tapecoat ® Tapes Protect Pipeline and Infrastructure from Corrosion. Tapecoat ® coatings are innovative cold applied tapes that exceed all previous performance criteria for the protection from corrosion of above and below ground pipelines, girth welds and fittings. Tapecoat incorporates a patented integrated primer into these protective tapes and eliminated the dangers of emissions and hazardous waste associated with the application of liquid primers. Tapecoat ® can be applied over a wide range of ambient temperatures for the protection of most metal surfaces. Please click here for TC ® PDF Product sheet.
	FEATURES - SPECIFICATIONS - APPLICATION
	Integrated Primer: - replaces flammable and hazardous liquid primers - eliminates VOC emissions - eliminates dangers of a toxic material spill - eliminates need to dispose of hazardous wastes - labor-saving application - aggressive tack gives consistent application - successfully tested by independent labs Adhesive Coating: - aggressive bond to steel and other metal substrates - cohesive strength as well as flexibility - excellent resistance to cathodic disbondment
	MAF® Backing: (H35 ®/ H50 ®) - pulls tight around fittings and irregular shapes - formulated for durability - thermally stable - abrasion resistant - UV resistant
	Tapecoat H50 ® Cold-applied above and below ground coating in tape form with an integrated primer. Tapecoat H35 ® and Tapecoat H50 ® are designed to protect above and below ground metal surfaces from corrosion and electrolysis. They are used for coating pipe, girth welds, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Their unique MAF backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H35 ® and Tapecoat H50 ® employ an integrated primer and are resistant to UV rays, thermal expansion, impact and abrasion. Both tapes can be applied over a wide range of ambient temperatures. Composition Tapecoat H35 ® and Tapecoat H50 ® are composed of a ® specially formulated MAF backing with a synthetic elastomeric adhesive. Impregnated into the adhesive is an integrated primer. Technical Data Color: ® Shelf life: Rotate stock yearly Standards: AWWA C-209 Recommended for use with: Coal Tar, Extruded Polyethylene, FBE, 3 Layer Systems, Coal Tar and Urethane Plant Coatings Low temp flex: Excellent Bacteria resistance: Excellent Thickness: H35 35 +/- 2 mils H50 50 +/- 2 mils Tests: ASTM D1737, ASTM G22, ASTM D1000, ASTM G8. Surface Preparation Surface must be clean and dry. SSPC-SP3 Power Tool Cleaning is recommended to remove any loose rust and scale, dust or dirt. A tack cloth for removal of fine dust particles is provided in each carton. Oil, grease and all other residue are to be removed from pipe surface per SSPC-SP1 Solvent Cleaning. SSPC-SP6 Commercial Blast Cleaning is optional. Tapecoat H35 ® and Tapecoat H50 ® are impregnated with an integrated primer. Tape Application Spiral Wrap: Tapecoat H35 ® and Tapecoat H50 ® are hand applied by removing the release liner and spirally wrapping with a continuous overlap of tape. Tension in wrapping should be enough to obtain conformability to the surface being coated. Cigarette Wrap: Pre-cut strips of Tapecoat H35 ® or Tapecoat H50 ® to a length equal to the circumference of the pipe plus a minimum of 4". Follow general tape applications described above. Tape Wrapping Machines: Information is available on the Tapecoat Tape Wrapster #3.

	H50 ® Tapecoat ® Tapes Protect Pipeline and Infrastructure from Corrosion. Tapecoat ® coatings are innovative cold applied tapes that exceed all previous performance criteria for the protection from corrosion of above and below ground pipelines, girth welds and fittings. Tapecoat incorporates a patented integrated primer into these protective tapes and eliminated the dangers of emissions and hazardous waste associated with the application of liquid primers. Tapecoat ® can be applied over a wide range of ambient temperatures for the protection of most metal surfaces. Please click here for TC PDF Product sheet.
	FEATURES - SPECIFICATIONS - APPLICATION
	Integrated Primer: - replaces flammable and hazardous liquid primers - eliminates VOC emissions - eliminates dangers of a toxic material spill - eliminates need to dispose of hazardous wastes - labor-saving application - aggressive tack gives consistent application - successfully tested by independent labs Adhesive Coating: - aggressive bond to steel and other metal substrates - cohesive strength as well as flexibility - excellent resistance to cathodic disbondment
	MAF® Backing: (H35 ®/ H50 ®) - pulls tight around fittings and irregular shapes - formulated for durability - thermally stable - abrasion resistant - UV resistant
	Tapecoat H50 ® Cold-applied above and below ground coating in tape form with an integrated primer. Tapecoat H35 ® and Tapecoat H50 ® are designed to protect above and below ground metal surfaces from corrosion and electrolysis. They are used for coating pipe, girth welds, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Their unique MAF backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H35 ® and Tapecoat H50 ® employ an integrated primer and are resistant to UV rays, thermal expansion, impact and abrasion. Both tapes can be applied over a wide range of ambient temperatures. Composition Tapecoat H35 ® and Tapecoat H50 ® are composed of a ® specially formulated MAF backing with a synthetic elastomeric adhesive. Impregnated into the adhesive is an integrated primer. Technical Data Color: ® Shelf life: Rotate stock yearly Standards: AWWA C-209 Recommended for use with: Coal Tar, Extruded Polyethylene, FBE, 3 Layer Systems, Coal Tar and Urethane Plant Coatings Low temp flex: Excellent Bacteria resistance: Excellent Thickness: H35 35 +/- 2 mils H50 50 +/- 2 mils Tests: ASTM D1737, ASTM G22, ASTM D1000, ASTM G8. Surface Preparation Surface must be clean and dry. SSPC-SP3 Power Tool Cleaning is recommended to remove any loose rust and scale, dust or dirt. A tack cloth for removal of fine dust particles is provided in each carton. Oil, grease and all other residue are to be removed from pipe surface per SSPC-SP1 Solvent Cleaning. SSPC-SP6 Commercial Blast Cleaning is optional. Tapecoat H35 ® and Tapecoat H50 ® are impregnated with an integrated primer. Tape Application Spiral Wrap: Tapecoat H35 ® and Tapecoat H50 ® are hand applied by removing the release liner and spirally wrapping with a continuous overlap of tape. Tension in wrapping should be enough to obtain conformability to the surface being coated. Cigarette Wrap: Pre-cut strips of Tapecoat H35 ® or Tapecoat H50 ® to a length equal to the circumference of the pipe plus a minimum of 4". Follow general tape applications described above. Tape Wrapping Machines: Information is available on the Tapecoat Tape Wrapster #3.
	Tapecoat® T Tape GPE - Cold Applied Tape Coating
	T Tape GPE
	Tapecoat®T Tape GPE - Cold Applied Tape Coating
	TAPECOAT T TAPE GPE - a 65 mil coating with a 3 mil polyethylene backing and 62 mils of adhesive for ambient temperature, below grade application. The 62 mil adhesive provides T Tape with a high degree of conformability. Appropriate for coating tees, bends and other irregular configurations, such as weld beads, wire connections, thermite-welds and all smaller diameter piping.
	Tapecoat®CT - Cold Applied Tape Coating
	TAPECOAT CT - a 35 mil cold-applied tape coating with a 7 mil polyethylene film backing and 28 mils of adhesive, for ambient temperature below grade application. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe.
	Tapecoat®Grey Pad - Cold Applied Mesh Backed Tape Coating
	TAPECOAT ® PAD - a 65 mil coating, packaged in 6 X 6 pads, with a polypropylene mesh fiber backing and pressure sensitive adhesive; used for easy application as a protective coating on small holidays, wire splices and thermite welds.
	ROYSTON One Step Tape
	ROYSTON ONE STEP TAPE - A 35 mil, primerless, cold applied tape coating with a 6 mil UV resistant polyethylene film backing,: for ambient temperature above and below grade application. Color: Green. *
	TR GREEN
	TR GREEN - A 35 mil cold applied tape with a flexible plastic backing and an elastomeric adhesive, for ambient temperature below grade application. Greenline Tape has a leading adhesive edge to secure the lap seal and guide in spiral wrap applications. Color: Green. Compatible primer: ROYSTON ROYBOND 747.
	Tapecoat®HT Sealant
	HT SEALANT - a conformable water tight coating for irregular surfaces which may be subjected to temperatures up to 300 degrees F (150 degrees C).
	ROYSTON SEALANT TAPES
	ROYSTON SEALANT TAPES - A moldable synthetic elastomeric adhesive that is specially formulated with different degrees of tack and pliability to accommodate the particular application need such as for sealant, caulking, insulation or waterproofing. Compatible primer: ROYSTON ROYBOND 747. TAPE A (Mil Thickness#) - A sealant tape with a moderate degree of tack and pliability. TAPE C (Mil Thickness#) aka. TAC-TAPE at 125 mils- a sealant tape with a high degree of` tack and pliability.
	Special coatings and repair kits: HANDY CAP - STANDARD
	HANDY CAP - STANDARD - A 4" X 4" exothermic weld coating system used in conjunction with ROYSTON Roybond 747 Primer. 747 Primer is available in aerosol dispensers or standard size liquid containers.
	Tapecoat® Reinforcing Scrim
	TC REINFORCING SCRIM - a polypropylene cloth material used as an optional reinforcing wrap to increase the impact resistance of liquid coatings. Packaged in rolls 2?, 4? and 6? x 100'.
	Tapecoat TC® Flo-Coat - Petrolatum Wax System
	TAPECOAT TC FLO-COAT - a corrosion preventive coating paste to fill and coat irregular contours.
	Tapecoat TC® Mastic
	TAPECOAT TC MASTIC - a thixotropic brush applied coal tar coating for ambient temperature, below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations.
	Tapecoat TC® Mastic 2000
	TAPECOAT TC MASTIC 2000 - a brush or spray applied bituminous coating for temperatures up to 250 degrees F, below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations.
	Tapecoat TC®Aluminum Mastic
	TAPECOAT TC ALUMINUM MASTIC - a brush or spray applied aluminum pigmented bituminous coating for ambient temperature, above or below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations. Operation temperature ambient to 250 degrees F.
	ROYSTON ROSKOTE A51
	ROYSTON ROSKOTE A51 - A hydrocarbon resin base mastic coating system for ambient temperature, below grade application. Appropriate for coating fittings, flanges, valves, tanks, mechanical couplings and other irregular configurations. Compatible primer: ROYSTON RAPID RED
	ROSKOTE 201
	ROSKOTE 201 - A coal tar epoxy coating is a cold-applied, 2 component, polyamide cured, coal tar epoxy for above and below ground protection in severely corrosive environments. Through chemical cross linking, forms a tough adhesion resistant coating to withstand physical damage, impact, temperature variations and underground soil stresses.
	Accessories: Royston SpliceRight
	Royston SpliceRight - Designed to insulate , waterproof, and protect low-voltage electrical connections. Its tacky elastomeric compound completely seals and waterproofs the connector area. This is then covered with a resin impregnated, moisture cured fabric which when dry provides a mechanical protection for the sealant. Royston Mini SpliceRight - Designed to protect plastic pipe trace wire splices. It consists of a black elastomeric putty to encapsulate the wire nut, and a 2 part epoxy armor to mechanically protect the putty.
	TAPE WRAPPING APPLICATOR TAPECOAT HAND WRAPSTER - a cold tape hand operated application tool, which can assist the operator in wrapping tape with the proper tension and overlap for piping 4' OD and above. HEAT APPLICATION TOOL PROPANE TORCH KIT The Magnum Torch with self-contained torch ignition is a wide mouth propane torch for applying hot applied tapes and sleeves. The kit includes a torch with a built-in igniter, burner head, regulator and 33' long hose.

About Us \| Product Info \| Installation \| Reference \| Custom Manufacturing Sales Reps \| Chase Corp \| Events \| News \| Projects \| Careers \| Contact Us